Open Class Rules:
Body
1. All glass, plastic, upholstery, light, mirrors, moldings and chrome must be removed.
2. Car numbers on both doors and on roof plate. Numbers on roof plate must be at least 10 inches tall. Letter may appear behind number and must be at least 8 inches tall. No four digit numbers allowed.
3. All holes in firewall & floor pan holes must be covered with metal.
4. May have steel under drivers seat and leg area or from center hum to rocker panel.
back to top
Roll Cage
1. Minimum of 4-point cage securely welded to frame.
2. Must have at least 3 driver’’s side door bars.
Safety is priority. Cages will be inspected; cages appearing unsafe will not race.
Engine
1. No Aluminum Blocks.
back to top
Fuel Tanks
1. Must be in trunk area.
2. Original tank must be removed and not relocated.
3. Tank must be designed for fuel, no homemade tanks.
4. No 5-gallon cans or buckets allowed.
5. Steel boat or plastic tanks ok but must be inside metal box.
6. Fuel cell recommended but not mandatory.
7. Fuel line inside drivers area must be inside metal tubing.
8. Electric fuel pumps must have rollover or crash shut off.
9. Must have check or rollover value and be leak proof.
back to top
Brakes
1. All four brakes must work. Must lock up on inspection.
back to top
Drive Shafts
1. Must be painted white.
2. Must have at least one strap or chain under drive shaft at least 18" behind transmission.
back to top
Battery
1. Securely fastened down and covered inside battery box.
back to top
Wheels and Tires
1. Racing tires or DOT tires. Maximum wheel width of 10”. May run 10" tire.
back to top
Weight
1. Must be painted white with car # on weight.
2. Weight must be securely mounted in car.
back to top
Driver Protection
1. Racing seat mandatory.
2. Fire suits mandatory (top and bottom).
3. Must have 5 point safety harness.
4. No open face helmets and must have neck brace.
5. Must have window net on drivers side, may do both sides.
Remember: Build the car for driver’s safety.
back to top |
